How do I remove the funnel?
Press and hold the tank cap with your left hand, turn this handle clockwise with your right hand, and you can remove the funnel.
How to remove mineral deposits?
To keep your coffee maker operating efficiently, you should clean away the mineral deposits left by the water regularly according to the water quality in your area and the frequency use the appliance, the detail is as follows:
- Fill the water tank with water and descaler to the MAX level in the gauge of coffee maker (the scale of water and descaler is 4:1, the detail refers to the instruction of descaler. Please use “household descaler”, you can use the citric acid instead of the descaler (the one hundred parts of water and three parts of citric acid).
- Push carafe on warming plate, pay attention to let center line of carafe aligns with that of funnel.
- Hold and press the ON/OFF button for about 3 seconds, the LCD display indicates “ ” and the “ ” keeps flashing, then press ON/OFF button again, its corresponding indicator turns on and the appliance begins working.
- The descaling is finished when the solution in the water tank being boiled away. Empty the solution in the boiler as the operation mentioned above.
- Then turn off the appliance and refill the water tank with clean water.
- Rinse by operating the appliance with water at least 3 times.
- Finally, empty the water in the boiler as the operation mentioned above.
What does the number range of 0.3-1.2 on the machine mean? How can I use it to control the coffee concentration?
0.3-1.2 represents the water intake speed.
The normal ratio of coffee powder to water is 1:15. The faster the water intake speed, the lower the coffee concentration will be; the slower the water intake speed, the higher the coffee concentration will be.
In other words, you can use this rotary button to control the coffee concentration. The closer the position is to 0.3, the higher the coffee concentration will be, and the closer it is to 1.2, the lower the coffee concentration will be.